background image

cycle features explained

  

Adjusting the tri-handlebars

The handlebars can be adjusted to match your individual 
requirements;
1.  loosen the multi-position handle
2.  tilt the handlebars into your desired position
3.  tighten the multi-position handle 

  

Using your tri-handle bars

The tri-handlebars offer a radically different exercise position, similar 
to that used by many professional cyclists when racing - to take 
advantage of this feature:
1.  Put the handlebars in the fully horizontal position
2.  Sit on the saddle and instead of gripping the handlebars with your 

hands, lean forwards and place your elbows in the elbow supports

3.  Grip the handlebars above the console
4.   You may have to re-adjust the seat height and reach to find the 

most comfortable position 

 

 

  

Adjusting the resistance

This cycle features a speed independent braking (resistance) system.  
The resistance is controlled by an electro-magnet, which uses varying 
amounts of current to alter the resistance level.  The user adjusts this 
resistance with buttons on the console, and the levels go from 1 = 
easy to 16 = hard

NOTE: the multi-position handle features a clever 
ratchet design to help you tighten it – there’s no need 
to turn the handle 360⁰ - simply push the button in the 
centre of the handle to ratchet tighten

multi-position 
handle

elbow 

supports

13

Monitoring your heart rate

This cycle has 2 ways of monitoring pulse rates:

Hand Pulse Sensors

This cycle is fitted with 2 hand pulse sensors.  To obtain a pulse reading 
you must have both your left and right hands on the sensors at the 
same time.  Do not grip the hand sensors too tight and allow the 
computer a few seconds to display the reading.

 

Wireless heart rate receiver

This cycle features a built in receiver meaning it will pick up the signal 
from a chest strap.  A chest strap will give a heart rate reading to ECG 
accuracy.  We recommend a chest strap is worn when using HRC 
programs.  To purchase one, please see the ‘Contact Us’ section at the 
start of this manual or visit www.yorkfitness.com

Hand pulse sensors

Some people may not be able to obtain an 

accurate hand pulse reading due to variations in 

circulation.

!

Summary of Contents for diamond c302





















Reviews: