![background image](http://html1.mh-extra.com/html/york-fitness/diamond-c302/diamond-c302_owners-manual_913714009.webp)
9
6. Attach the seat and seat post
1. Attach the towel rail and seat mount to
the bottom of the seat as shown
(Screws and washers are located in the
underside of the seat)
2. Fix the seat to the top of the seat post,
using the spanner to tighten both sides
3. Slide the seat post into the seat post
mounting tube and secure in position
with the pull plunger
FIXINGS:
FIXINGS:
x 1
Part
No.
13
x 1
Part
No.
52c
x 3
Part
No.
52d
7. Attach the pedals
1. Attach the straps to the pedals (the straps
and pedals are marked L and R, match each
strap to the corresponding pedal)
2. Attach the L pedal to the left crank arm
– this pedal will thread on anti-clockwise
3. Attach the R pedal to the right crank arm
– this pedal will thread on clockwise
8. Attach water bottle and holder
1. Fix the water bottle to the front post
using the screws as shown
(Screws are located in the front post)
2 Slide the water bottle into the holder
FIXINGS:
FIXINGS:
x 2
Part
No.
44
Final Checks
Your cycle is now assembled. Please make the following final checks before you use it for the first time
•
Make sure all screws / bolts are tightened
•
Make sure you have positioned it on a flat, level surface
Power up
1. Plug one end of the adaptor into your cycle as shown
2. Plug the other end into a suitable AC outlet
(220 – 240v – 50Hz)
52c
52d
52d
52c
13
44