York Fitness anniversary x201, Owner'S Manual, Page: 10 / 20

10
FIXINGS: FIXINGS:
x 4
Part
No.
52
9. Attach the computer
1. Connect the middle wire, that comes out of the front post, to the
computer plug on the back of the computer console
2. Secure onto the bracket using screws as shown - (screws are
located in the back of the console)
3. Plug the hand pulse sensor into the right side socket on the back
of the computer
Final Checks
Your cross trainer is now assembled. Please make the following final checks before you use it for the first time.
•
Make sure all screws / bolts are tightened
•
Make sure you have positioned it on a flat, level surface
Power up
1. Plug one end of the adaptor into your cross trainer as shown
2. Plug the other end into a suitable AC outlet (220 – 240v – 50Hz)
8. Attach the front handle bar
1. Secure the front handle bar to the front post
via the fixing bracket using 4 x carriage bolts,
4 x spring washers and 4 x curve washers
FIXINGS: FIXINGS:
x 4
Part
No.
59
x 4
Part
No.
49
x 4
Part
No.
61
52
49
59
61
49
59
61