![background image](http://html1.mh-extra.com/html/york-fitness/active-100-exercise-cycle-53066/active-100-exercise-cycle-53066_owners-manual_913704005.webp)
www.yorkfitness.com
www.yorkfitness.com
5
Assembly instructions
Care & Maintenance
• This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the equipment in a dry
place with as little temperature variation as possible.
• We recommend placing a mat beneath the equipment to protect both the equipment and your flooring.
• Always place the equipment in a dry environment.
• Use a warm, damp cloth to keep the product clean.
• No wet cleaning of electrical components. Unplug before any care and maintenance.
• The safety level of the equipment can be maintained only if it is regularly examined for damage and wear. This
includes any ropes, pulleys, nuts, bolts, moving parts, bushes, chains, wheels, bearings & connection points etc.
• Ensure that you inspect the product regularly - at least once a week is recommended.
• Ensure that all fixings are tight before use.
• Always replace damaged / worn components with original parts from the manufacturer.
Prepare your work area - It is important you assemble the product in a clean and uncluttered space.
Work with a friend - We recommend you have someone assist you with the assembly as some
of the components are quite heavy.
Open the carton - Check any warnings on the carton and make sure you have it the right way up.
Unpack the carton - Remove all the parts and lay them out on the floor.
Blister Pack
J4 x 1
BUSHING
(Ø7 X Ø12 X 25MM)
J2 x 8
CURVED WASHER
(Ø8 X Ø19 X 2T)
J6 x 1
FLAT WASHER
(Ø7 X Ø12 X 1T)
J8 x 1
FLAT WASHER
(Ø8 X Ø16 X 2T)
J9 x 5
ALLEN BOLT
(M8 X 16MM)
J3 x 4
CARRIAGE BOLT
(M8 X P1.25 X 65MM)
J1 x 4
ACORN NUT
(M8)
J x 1
T-SHAPE KNOB
(M7 X 55MM)
K x 1
SCREWDRIVER
L x 1
ALLEN KEY
M x 1
WRENCH
J7 x 1
SPRING WASHER
(Ø7 X 2T)