![background image](http://html1.mh-extra.com/html/york-fitness/active-100-exercise-cycle-53066/active-100-exercise-cycle-53066_owners-manual_913704013.webp)
www.yorkfitness.com
www.yorkfitness.com
13
Batteries Replacement Instructions:
1. Remove the meter from the exercise cycle.
2. Open the battery compartment cover.
3. Remove battery by pulling the battery in direction of
spring and lift opposite end upwards.
4. Insert 2 AA batteries ensuring you match the polarity
markings (+ and -) on the batteries with the indicators in
the battery compartment. Push flat end ( - ) against spring
and when clear push other end into holder.
5. Close the battery compartment.
Tips & Warnings
• Always change both batteries at the same time.
• Always use the same type of batteries.
• Never recharge Alkaline AA batteries.
• Do not try to heat, ignite, disassemble or throw AA
batteries into a fire.
• Do not leave old batteries in the console, and remove batteries
from the console if you won’t be using it for a long time.
Protect the environment by not disposing of this product or
batteries with household waste. Check your local authority
for recycling advice and facilities.
Troubleshooting
If you have a problem with your exercise cycle, before you do anything else please check
that all the cables have been connected correctly. loose cables are very common and many
problems can be solved by making sure the cables are properly connected.
The following table details the most common problems and how to fix them. If you still have a problem
after going through the troubleshooting guide please call your local YORK distributor for advice.
PROBLEM
CORRECTION
NO DISPLAY
When the display of LCD is weak, it means the batteries need to be
changed.
NO SPEED
DISPLAY
If there is no signal when you pedal, please check if the cable is well
connected.
FOR YOUR OWN SAFETY, DO NOT OPEN PROTECTIVE CASING. IF ERROR PERSIST,
PLEASE CONTACT YOUR LOCAL YORK DISTRIBUTOR FOR ADVICE. KEEP THE EQUIPMENT
OUT OF USE UNTIL IT IS REPAIRED.