www.yorkfitness.com
12
Adjusting The Resistance
This exercise cycle features a speed independent
braking (resistance) system. The resistance is
controlled by a magnet, which is moved closer
or further away from the flywheel - the closer the
magnet is to the flywheel the higher the resistance.
A
C
T
I
V
E
1
0
0
Resistance Level
Levelling Your Exercise Cycle
To help you level the exercise cycle on uneven
surface, 2 height adjusters are included on the rear
stabilizers. Simply twist these around to adjust the
height of the cycle.
A
C
T
I
V
E
1
0
0
Adjust the seat
1. Unscrew the hand wheel.
2. Adjust the seat to your requirements.
3. Re-screw the hand wheel - make sure it is
screwed tightly.
4. The basic rule for getting the seat height right
is that as the pedal reaches its lowest point, the
leg is almost straight.
Note: Do not pull the seat out too far - the
maximum is indicated with a piece of tape on the
seat post.
A
C
T
I
V
E
1
0
0
Operational instructions
