Optional Laser Installation
Part 6
To utilize the laser engraving functionality of the
SilverBack, the
will need to be
installed in the Spindle Mount, as described in Part 2.
The user will also need to change the controller
configuration, in particular the $32 setting will need to
be set to a “1” to enable proper laser operation.
Please note that the default $30 value of the controller
should be 1000 - this means that the S-MAX value for
laser engraving will need to be the same settings of
1000 to equal 100% power to the laser module.
The laser module cable connects to the rear of the
Controller, and the Laser/Spindle Selector Switch will
also need to be set to “Laser”.
Laser Engraving with your SilverBack
