Part 5
Key GRBL Settings
Intro
The SilverBack motherboard has a series of settings on it that allow
your machine to work correctly. We typically recommend that the end
user not alter these settings, except as directed by Technical Support.
Go to Easel » Advanced » Machine » Machine Inspector » Settings. This
will display all the Grbl settings values from the router. Copy these into
a text editor and save the file somewhere as a baseline. No matter how
much you may mess up the settings, you will always have a previous set
to go back to.
You will see a list of $xx=yy lines where xx is the setting number and yy
is the current value. To change a value send the command of $xx=zz in
the console, where xx is the setting number and zz the new value.
These will be permanently stored on the motherboard so they only
need to be changed once.
Recommended Settings - Router