Mechanical Installation
Part 2
Step 7
Parts Required:
➔
Left Side Rail with Left Motor
Assembly
➔
Timing Belt
➔
2 Timing Belt Clamp Screws
Route Timing Belt (with teeth down) OVER
the synchronous wheel on the Y axis
stepper motor, and UNDER the rollers, as
shown.
Secure belt at both ends of the rail as
shown - do not overtighten and twist belt.
Belt should be taut, but still allow free
movement on the motor assembly.
Set Left Side Rail Assembly aside until
Frame Assembly steps.
Ensure screw hole is
accessible