Yongnuo E-TTL, User Manual

Page: 9 / 31

3.Install Flash on the Hot Shoe of the
Transceiver (as Receiver)
Preparation Before Use
7
1. Install the transceiver on the
mini stand or other fixing
equipment (excluded).
2. Loosen the locking ring of the
flash.
3.
Slip the mounting foot of the
flash into the receiver.
4. Tightly lock the locking device
of the flash.
!
connected reliably before use, turn all equipments
on, setting the transceivers in the same channel,
set the group of receivers , test button can be used
to awaken and test whether the flash works before
shooting(refer to Page 10), trigger the flash until
flash recyling completely.
Check that all equipments are installed and
Caution! The hot shot of the
transceivers can only install
flash being applicable to DSLR
cameras, can not install high-
v o l t a g e f l a s h , o r t h e
transceiver may be damaged.