Troubleshooting
1. Fail to power on or automatic shutdown:
● The battery is loaded inversely or exhausted; it will power off
automatically when the battery is going to be exhausted in
case of being over discharged.
▲
Install the battery according to the correct direction the
battery compartment indicates and ensure the battery is full
and restart the power (refer to page 8).
2. The flash doesn't fire
Ensure the power of all equipments are full, the connection
among the transceiver, camera and the flash is reliable;
whether the indicator is set in the same channels and
controllable groups. Flashes recycle process, entering in the
state of overheating protection, ongoing zoom adjustment,
the flash enters into sleep status etc. may makes the flash
doesn't fire
. Ensure the flash is in ready state, use the [Test]
button test the flash before using.
3. Fail to enable the 2nd curtain sync:
● That’s because the restriction of camera menu.
▲
It shall set the wireless function disabled if needs using the
2nd curtain sync.
4. Can't access into the external flash function menu or the
menu is displayed abnormally:
● The transmitter is not installed right , the contacts of the hot
shoe is stained or the power of the battery is exhausted.
▲
Reinstall the transmitter and clean the contacts ,
batteries.
5. The assist beam emitter doesn't work:
Refer to page 24.
6. The on-top flash doesn't fire
：
Enabled the master flash via the wireless function setting.
replace the
26
Summary of Contents for E-TTL
Page 1: ...User Manual...
Page 31: ......
