COMMENTS/QUESTIONS? VISIT YOLOBIKE.COM
Your bike has been largely pre-assembled and only requires a few additional
assembly steps before you’re ready to ride. In addition, its settings and functions
have been tested prior to shipping from our manufacturing facility.
1. Remove the bike from the box and
remove packaging materials. Stand the
bike frame upright with the kickstand
down. Remove all materials and set parts
aside for assembly. Please follow the
guidelines below for correct assembly.
2. Carefully remove all packaging materials
from the box, and around the bike, to avoid
scratching the frame with any sharp or
metal tools.
3. Locate and set aside the battery charger
and box with pedals.
4. First install the front wheel. In order to
pack efficiently please note that in the
shipping box the front fork is positioned
backwards. Before installing the front
wheel, you must rotate the front fork/
handlebar stem 180 degrees. Once the
fork is rotated, the brake cables will be
positioned most naturally and your disc
brake with be on the rider’s left – the same
side as the rear disc brake. You’re ready
to mount the front wheel and the fork
pointing forward (Figure 1).
A S S E M B L Y I N S T R U C T I O N S
5. The front wheel is a quick-release type
fork. The quick-release mechanism must
be set squarely and firmly tightened to
ensure safety (Figure 2). Please check
before each ride.
Figure 1
Figure 2
Summary of Contents for Bolt
Page 1: ...O W N E R S M A N U A L...
