COMMENTS/QUESTIONS? VISIT YOLOBIKE.COM
LCD DISPLAY/CONTROLLER PROGRAMMING AND USE:
Your waterproof 3” LCD display allows you
to monitor and control your pedal-assist
bike (Figure 1).
BASIC OPERATION
Power on and off by holding down the
power button. The Power Assist (PAS) level
is indicated on screen, lower left. There are
6 manual levels you may select at any time
during powered operation, by pressing
the + or - button. Zero (0) is natural
pedaling with no assist from the motor.
Your Battery Life indicator is displayed by five lateral bars.
MANUAL ADJUSTMENTS
By depressing and holding the “SET” button, you access separate adjustments including
Power Level, Trip Meter, Max Assist Speed, Wheel Size and MPH/KMP. By depressing the
SET button, you may scroll through options and use the + or -buttons to select.
Depress and hold “SET” until flashing subsides, to save and exit manual adjustments.
NOTE: Manual overrides via the LCD display reset each time the display is cycled off/on.
*It is recommended that new owners limit the maximum speed through manual adjustment and all
riders take advantage of this limiting control, until such time that one becomes more accustomed to
the substantial power-assist potential.
After 5 minutes of inactivity the LCD Meter will automatically turn off to conserve power.
Figure 1
Summary of Contents for Bolt
Page 1: ...O W N E R S M A N U A L...