background image

COMMENTS/QUESTIONS? VISIT YOLOBIKE.COM

BATTERY CHARGER 

The battery slides out vertically (Figure 2).  
After charging, replace the battery ensuring 
that it slides down the location runners 
provided on the frame and plug it firmly into 
the frame before locking in position with the 
ignition key.

After use always charge your battery fully for 
best performance. There is no memory effect 
so you can charge the battery after short 
rides without damage. 

The charger will recharge a fully depleted battery in 4-6 hours. The LED will turn orange 
when charging then green when fully charged. It is recommended to always unplug the 
charger once complete.

Check to make sure unit is charged in a 120v outlet. Take care not to drop the charger as 
it has sensitive electronics inside and damage may result. Do not cover with any material 
or substance that may restrict airflow into the charger.  The charger needs to be able to 
“breathe” and be kept cool so avoid subjecting the battery to high temperatures, such as 
direct sunlight, for extended periods of time. Do not submerge the battery in water while on 
or off the bike or while riding.

Remember that charging the bike each time you use it will ensure longer life of the battery. 
DO NOT leave the battery discharged for long periods. This will damage the lifespan of the 
battery. Never open the charger or change the settings on charger.

Figure 2

Summary of Contents for Bolt





















Reviews: