background image

13

COMMENTS/QUESTIONS? EMAIL [email protected]

SAFETY AND PRODUCT WARNINGS 

YOUR MAIDEN VOYAGE:

Before your first ride it’s important to familiarize yourself with the operation of the bike. 
Start in a low traffic area while you get used to operating the controls and the power of the 
bike, particularly the LCD display panel and the brake system. The rear brake should always 
be applied before but in conjunction with the front brake. 

ADDITIONAL PASSENGERS:

The YOLO

®

 Beach Bolt is designed for one passenger. DO NOT carry any additional 

passengers on the frame, handlebars or front or rear racks that may be installed. 

WEIGHT CAPACITY:

The YOLO

®

 Beach Bolt e-bike is designed to carry a maximum weight of approximately 275 

lbs. Exceeding the maximum weight can result in damage to the bike or injury.  

WARNING…UNDERSTAND THE RISKS AND USE EXTRA CAUTION:

Electric bikes are motorized (even those without a throttle) and reach higher speeds than 
traditional bikes. Therefore, the risks and dangers of operating an electric bike may exceed 
those of operating a traditional bike. The user assumes all risk of personal injury, injury to 
others, operational failure of the bicycle or its systems, and all other losses or damages to 
themselves and others and to any property resulting from the use of the electric bicycle. 
Your insurance policies may not provide coverage for accidents involving the use of an 
electric bicycle. To determine if you are covered, you should contact your insurance agent 
or provider. 

Before riding you should review, understand, and ALWAYS follow all local, state and federal 
guidelines, road rules and laws surrounding use of electric bikes. Laws require use of a 
helmet and in many states a minimum age for riders. 

Summary of Contents for Beach Bolt


























Reviews: