20
COMMENTS/QUESTIONS? EMAIL [email protected]
LCD DISPLAY/CONTROLLER PROGRAMMING AND USE:
MANUAL ADJUSTMENTS
By depressing and holding the “SET” button, you access separate adjustments including
Power Level, Trip Meter, Max Assist Speed, Wheel Size and MPH/KMP. By depressing the
SET button, you may scroll through options and use the + or -buttons to select.
Depress and hold “SET” until flashing subsides, to save and exit manual adjustments.
NOTE: Manual overrides via the LCD display reset each time the display is cycled off/on.
*It is recommended that new owners limit the maximum speed through manual adjustment
and all riders take advantage of this limiting control, until such time that one becomes more
accustomed to the substantial power-assist potential.
After 5 minutes of inactivity the LCD Meter will automatically turn off to conserve power.
