To c o n fi g u r e a
Va l v e
G a s / Wa t e r
Controller as the responder, ensure
the
Valve
has
Gas/Water
Controller
already been bound to the YoLink
app. Using the app, CLOSE the valve
( ve r i f y t h e va l ve i s s h ow n to b e
Closed on the app, or press the Close
bu on if it is shown as Open) (FOR
GAS VALVE CONTROL). Press and hold
the SET bu on for 5-10 seconds un l
the LED quickly blinks
, then,
green
release the bu on
2
Refer to the Gas/Water Valve Controller
manual for more informa on:
YS4909-UC
Gas/Water Valve
Controller
b.
SET Bu on
(5-10 seconds)
a.
Close the valve
Upon pairing, the LED will
stop blinking (this may
happen a er only blinking
two or three mes)
3
1. If you want to open the Gas/Water Valve Controller when the smoke & CO alarm ac vates (FOR
WATER VALVE CONTROL ONLY), open the Gas/Water Valve Controller first , and let it enter pairing
mode
2. For the same YoLink Wireless Communica on Base and Gas/Water Valve Controller, you can only
choose to either open or close the Gas/Water Valve Controller when the smoke & CO alarm ac vates
15
