19
Hnd stands for throttle, HL for turn-assisted pushing, HL-N for throttle-assisted pushing, HL-Y for
throttle-assisted pushing, that is, when turning the throttle, the display enters the boost-driven
mode; by
UP / DOWN
You can switch Y / N, press the
‘i’
key to confirm, if you select N, you will
enter the throttle position enable setting interface; otherwise, you will return to the display
instrument setting item selection interface. The display's factory default value is N.
Throttle setting interface
Throttle gear enable setting
HF-Y stands for throttle step, HF-N means throttle is not stepped. If throttle step is selected, it
means that when turning the throttle, the maximum speed can only reach the corresponding speed
corresponding to the gear position displayed on the meter. Split, it means that when turning the
throttle, it is not limited by the gear on the display, and can reach the rated maximum speed. You
can set Y / N by pressing the UP / DOWN button. Press the "i" key to confirm and return to the
throttle to assist the implementation. Enable setting interface; long press
“I” key to confirm and return to the setting item selection interface of the display. The factory
default value of the meter is N.
Throttle gear enable setting interface
