Yokota YED-90, Manual

Page: 33 / 54

-31-
Vise etc.
■ Other precautions
About the tool
● Do not touch the oil plug except for repairing.
It can cause early oil leakage.
● Using a tool which has been in storage for more than
6 months may cause oil leakage because of damage
to the seal part on the impulse mechanism.
When putting the tool in storage for a long period, be sure
to make the periodical maintenance, running the tool with
load every 6 months in order not to stick the seal part to
other component part.
We can offer the inspection service. Please ask us for the
service.
● Be sure to do warm-up operation with a tool for about
10 seconds by putting a main shaft under load in cold
weather region or at the beginning of the shift in
winter season.
Also note there may be a possibility of getting slip phenom-
enon (no pulsing).
※ Recommended temperature to be used: ５℃〜４０℃
● Long socket, larger sockets and so forth will cause
the slipping phenomenon.
CAUTION