YOKOGAWA YTA610, User Manual

Page: 42 / 49

<5. Parameters Lists>
5-1
IM 01C50T01-02EN
5. Parameters Lists
RW: read/write
R: read only, M: Method
Item Parameter Description Write
Initial
Setting
Memory Tag Up to 8 characters RW
Long Tag Up to 32 characters RW
Descriptor Up to 16 characters RW
Message Up to 32 characters RW
Date RW
Process
variable
Engineering
Unit
PV Unit (SV,TV, QV) Process variable unit RW °C
Range LRV/URV Specify the calibration range. RW LRV: 0
URV: 100
Apply values Value for 4 and 20 mA signal is set with actual
input applied
M ─
Damping
time
constant
AO Damping Specify the response time of process variable
within 0 to 100 seconds.
RW 8 s
Damping
holding point
AO Damp Point Specify the % of the output range. When the
amount of variation is larger than the set value,
it does not perform the dumping process.
RW 0%
Variable
mapping
PV is (SV, TV, QV) Sensor1, Terminal, Sensor1-Terminal (for
single input)
Sensor2, Sensor1-Sensor2, Sensor2-Sensor1,
Average, Sensor2-Terminal: (for dual input)
Sensor backup
RW PV:
Sensor1
SV:
Terminal
TV:
Terminal
QV:
Terminal
Sensor1
Configuration
Sensor1
Type and
wire
set Sns1 Probe Specify sensor type and number of wires. M
Sensor1
type
Sns1 Probe Type Sensor1 type. R Pt100
Sensor1 wire Sns1 Wire Number of Sensor1 wires R 3 Wire
Sensor1 unit Sns1 Unit °C, K,°F, °R, mV or ohm RW °C
Sensor1
damping
Sns1 Damp Specify the response time of sensor1 within 0
to 100 seconds.
RW 2s
Sensor1
matching
set Sns1 Matching This function is available only when optional
specification /CM1 is specified. Select enable
or disable.
M
Sns1 CVD
(R0, A, B, C, AI pha,
Delta, Beta)
Sensor1 matching co-efficient. R