YOKOGAWA YewSeries 80, User Manual

Page: 41 / 66

5-15
IM 01B04K02-02E
Setting
1
2
3
App
1
2
3
5
6
7
8
4
No.
Parameter Name Symbol Description Setting Range Factory-set
Value
Display
Conditions
P Adjustment
Parameters
ADJUST
P01 Wiring Resistance
correction1
WIRING R1 Corrects the wiring
resistance of input1.
Note:Initialized when
BURN OUT1 is changed
by parameter or setting
jumper.
RESET
EXECUTE
RESET Display on all.
P03 Input1 Zero
Adjustment
ZERO ADJ1 Performs zero adjustment (0% side) on input 1.
n.nnn ** RST
n.nnn ** INC
n.nnn ** HINC
n.nnn ** HDEC
n.nnn ** DEC
“n.nnn” indicates the current input value.
“**” indicates mV when mV or TC input, and OHM when RTD
input.
Increase or decrease “n.nnn” until the target value is reached
selecting INC/DEC.
INC/DEC: Increase/decrease “n.nnn.”
HINC/HDEC: Increase/decrease “n.nnn” more rapidly than INC/
DEC.
RST: When a reset is made, the adjustment values return to their
factory settings.
Note: Initialized when
- SENSOR TYPE1
- TC TYPE1 or
- RTD TYPE1 is changed.
P04 Span Adjustment
(Input 1)
SPAN ADJ1 Performs span adjustment (100% side) on input 1.
Procedure for adjustment is same as that of ZERO ADJ1.
Note: Initialized when
- SENSOR TYPE1
- TC TYPE1 or
- RTD TYPE1 is changed.
P60 Self Check SELF CHK Displays the result (GOOD/ERROR) of the self check.
Q Test Parameters TEST
Q04 Alarm 1 Forced
Output
RLY1 TEST Forcibly executes relay
output regardless of the
input state.
Note: After the test ends,
press the OK key to cancel
the forced output state and
set to the normal
operation state.
DE-ENERGIZED
ENERGIZED
Display on all.
Q05 Alarm 2 Forced
Output
RLY2 TEST DE-ENERGIZED
ENERGIZED
Displayed on
SALD-724
Q60 Self Check SELF CHK Displays the result (GOOD/ERROR) of the self check. Display on all.
5.4 Parameter List