YOKOGAWA Yew 80 Series, User Manual, Page: 39 / 66

5-15
IM 01B04K01-02E
Setting
1
2
3
App
1
2
3
5
6
7
8
4
No.
Parameter Name Symbol Description Setting Range Factory-set
Value
Display
Conditions
D Setting Parameters SET(I/O)
D01 Tag Number 1 TAG NO.1 8 alphanumerics can be
entered.
Displayed on all
D02 Tag Number 2 TAG NO.2 8 alphanumerics can be
entered.
D03 Comment 1 COMMENT1 8 alphanumerics can be
entered.
D04 Comment 2 COMMENT2 8 alphanumerics can be
entered.
D17 Linearization 1 LINEARIZE1 Specifies square root
calculation ON/OFF.
OFF
SQR
OFF Displayed on
SKYD-200, -204
D19 Low Cut 1 LOW CUT1 Specifies low-cut point
during square root
calculation.
0.3 to 100.0 % 1.0 % Displayed on
SKYD-200, -204
Displayed when
LINEARIZE1=SQR
D40 Input Decimal Point
Position
DP1 Sets the position of the
decimal point for the input
scale (SCH1, SCL1).
#####
####.#
###.##
##.###
####.# Displayed on
SKYD-204
D41 Input Scale L SCL1 Sets the conversion
standard value at 1V input
to scale and display the
input value in engineering
units.
-9999 to 9999
(engineering unit)
0.0
D42 Input Scale H SCH1 Sets the conversion
standard value at 5V input
to scale and displays the
input value in engineering
units.
-9999 to 9999
(engineering unit)
100.0
D46 PV1 PV1 Displays the input value
after input processing
(scaling).
D47 Input 1 Bias BIAS1 Adds the bias value to
the value after input
processing, and displays as
the PV1.
±10% of scaled
span (EUS) *1
±0% of span
(EUS) *1
D51 Display Mode DSP MODE Selects the display setter
state after 30 minutes
elapses after a key switch
operation.
OFF: Power save mode
Only the decimal point
is displayed.
ON: Constant ON mode
Data is displayed at
all times regardless of
elapsed time.
OFF
ON
ON
D60 Self Check SELF CHK Result of self check
(GOOD/ERROR) of the self check.
Displayed on all
*1: Initialized when changing SCH1, SCL1
5.4 Parameter List