manualshive.com logo in svg

YOKOGAWA WT1801E, User Manual, Page: 131 / 154

Share
Download
YOKOGAWA WT1801E User Manual Download Page 131

20-6

IM WT18O1E-02EN

Connecting to this instrument from a PC

1.

  Open a Web browser* on a PC that is connected to the network.

*  Recommended browser: Internet Explorer 9.0 or later

2.

  Enter the following address.

http://xxx.xxx.xxx.xxx/
(Type the IP address of this instrument for xxx.xxx.xxx.xxx.)

3.

  Enter the user name and password that you set on the network setup screen of this instrument, 

which is shown on the previous page, and connect to this instrument.

The following screen appears.

Note

If you set the user name to “anonymous,” you can access this instrument without entering a password.

Home Screen

Information about the instrument is displayed.

  

Control Screen

4.

  Click the Control tab.

The following screen appears.

 

Set the resolution.

Select LOW (512×384) or HIGH (1024×768).

Message

Refresh screen button

Auto refresh start/stop button

Set the screen refresh interval.

Set in the range of 5 to 60 s.

LCD

Control panel area

20.4  Monitoring the display of this instrument from a PC (Web Server)

Summary of Contents for WT1801E



























































































































































Reviews:

No comments