Commands
5-11
IM 760151-17E
5
Command
Function
Page
Common Command Group
*CAL?
Executes zero calibration (zero level compensation, same operation as
pressing CAL (SHIFT+MEASURE)) and queries the result.
5-87
*CLS
Clears the standard event register, extended event register, and error queue.
5-87
*ESE
Sets the standard event enable register or queries the current setting.
5-87
*ESR?
Queries the standard event register.
5-88
*IDN?
Queries the instrument model.
5-88
*OPC
Sets a “1” to bit 0 (OPC bit) of the standard event register upon the
completion of the specified overlap command.
5-88
The register is cleared when the value rounded to an integer is a
non-zero value.
5-88
*OPC?
ASCII code “1” is returned when the specified overlap command is
completed when
OPC?
is transmitted.
5-88
*OPT?
Queries the installed options.
5-88
*PSC
Sets whether or not to clear the registers at power on or queries the
current setting.
5-88
*RST
Executes the initialization of settings.
5-88
*SRE
Sets the service request enable register or queries the current setting.
5-89
*STB?
Queries the status byte register.
5-89
*TRG
Executes the same operation as when SINGLE (SHIFT+HOLD) is pressed.
5-89
*TST?
Performs a self-test and queries the result.
5-89
*WAI
Holds the subsequent command until the completion of the specified
overlap operation.
5-89
5.1 Command List