manualshive.com logo in svg

YOKOGAWA WT1600FC, User Manual, Page: 2 / 163

Share
Download
YOKOGAWA WT1600FC User Manual Download Page 2

i

IM 760151-17E

1st Edition: July 2003

All Rights Reserved, Copyright © 2003 Yokogawa Electric Corporation

Thank you for purchasing the YOKOGAWA WT1600FC Impedance Meter.

This Communication Interface User’s Manual describes the functions of the GP-IB,

serial, and Ethernet interfaces and commands.  To ensure correct use, please read this

manual thoroughly before beginning operation.

After reading the manual, keep it in a convenient location for quick reference whenever a

question arises during operation.

The following two manuals, including this one, are provided as manuals for the

WT1600FC.  Read them along with this manual.

Manual Title

Manual No.

Description

WT1600FC Impedance Meter

IM 760151-01E

Explains all functions and procedures of the

User’s Manual

WT1600FC excluding the communication
functions.

WT1600FC Impedance Meter

IM 760151-17E

This CD-R.  Explains the communication

Communication Interface

functions of the GP-IB, serial, and Ethernet

User’s Manual

interfaces.

Notes

• The contents of this manual are subject to change without prior notice as a result of

continuing improvements to the instrument’s performance and functions.

• Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents.  However, should you have any questions or find any errors, please

contact your nearest YOKOGAWA dealer.

• Copying or reproducing all or any part of the contents of this manual without the

permission of Yokogawa Electric Corporation is strictly prohibited.

Trademarks

• MS-DOS or Visual Basic is either a registered trademark or trademark of Microsoft

Corporation in the United States and/or other countries.

• Adobe, Adobe Acrobat, and PostScript are trademarks or registered trademarks of

Adobe Systems Incorporated.

• For purposes of this manual, the TM and 

 symbols do not accompany their

respective trademark names or registered trademark names.

• Other company and product names are trademarks or registered trademarks of their

respective companies.

Revisions

• 1st Edition:

July, 2003

Summary of Contents for WT1600FC




































































































































































Reviews:

No comments