YOKOGAWA WT1600FC User Manual Download Page 38

Page: 38 / 163

5-2

IM 760151-17E

Command

Function

Page

:DISPlay[:NUMeric]:NORMal:IAMount

Sets the numeric display format for power measurement or queries the

current setting.

5-22

:DISPlay[:NUMeric]:NORMal:ICURsor

Sets the cursor position on the numeric display (split display) for power

measurement or queries the current setting.

5-22

:DISPlay[:NUMeric]:NORMal:ITEM<x>

Sets the numeric display item for power measurement or queries the

current setting.

5-23

:DISPlay[:NUMeric]:NORMal:PRESet

Presets the display order pattern of numeric display items for power measurement. 5-23

:DISPlay:TRENd?

Queries all settings related to the trend.

5-23

:DISPlay:TRENd:ALL

Collectively turns ON/OFF all trends.

5-23

:DISPlay:TRENd:FORMat

Sets the display format of the trend or queries the current setting.

5-23

:DISPlay:TRENd:NORMal?

Queries all settings related to all the trends for power measurement.

5-24

:DISPlay:TRENd:NORMal:ITEM<x>?

Queries all settings related to the trend for power measurement.

5-24

:DISPlay:TRENd:NORMal:ITEM<x>[:FUNCtion]

Sets the trend item for power measurement or queries the current setting.

5-24

:DISPlay:TRENd:NORMal:ITEM<x>:SCALing?

Queries all settings related to the scaling of the trend for power measurement.

5-24

:DISPlay:TRENd:NORMal:ITEM<x>:SCALing:MODE

Sets the scaling of the trend for power measurement or queries the current setting. 5-24

:DISPlay:TRENd:NORMal:ITEM<x>:SCALing:VALue

Sets the upper and lower limits of manual scaling of the trend for power

measurement or queries the current setting.

5-24

:DISPlay:TRENd:PDIV

Sets the horizontal axis (Point/div) of the trend or queries the current setting. 5-25

:DISPlay:TRENd:RESTart

Restarts the trend.

5-25

:DISPlay:TRENd[:SAMPling]

Turns ON/OFF the trend waveform sampling or queries the current setting.

5-25

:DISPlay:TRENd:TDIV

Sets the horizontal axis (T/div) of the trend for power measurement or

queries the current setting.

5-25

:DISPlay:TRENd:T<x>

Turns ON/OFF the trend or queries the current setting.

5-25

:DISPlay:WAVE?

Queries all settings related to the waveform display.

5-25

:DISPlay:WAVE:ALL

Collectively turns ON/OFF all waveform displays.

5-26

:DISPlay:WAVE:FORMat

Sets the display format of the waveform or queries the current setting.

5-26

:DISPlay:WAVE:GRATicule

Sets the graticule (grid) type or queries the current setting.

5-26

:DISPlay:WAVE:INTerpolate

Sets the interpolation method of the waveform or queries the current setting. 5-26

:DISPlay:WAVE:MAPPing?

Queries all settings related to the waveform mapping to the split screen.

5-26

:DISPlay:WAVE:MAPPing[:MODE]

Sets the waveform mapping method for the split screen or queries

the current setting.

5-26

:DISPlay:WAVE:MAPPing:{U<x>|I<x>}

Sets the waveform mapping to the split screen or queries the current setting. 5-26

:DISPlay:WAVE:SVALue

Turns ON/OFF the scale value display or queries the current setting.

5-27

:DISPlay:WAVE:TLABel

Turns ON/OFF the waveform labels or queries the current setting.

5-27

:DISPlay:WAVE:{U<x>|I<x>}

Turns ON/OFF the waveform display or queries the current setting.

5-27

FILE Group

:FILE?

Queries all settings related to the file operation.

5-26

:FILE:CDIRectory

Changes the current directory.

5-26

:FILE:DELete:IMAGe:{TIFF|BMP|PSCRipt}

Deletes the screen image data file.

5-26

:FILE:DELete:NUMeric:{ASCii|FLOat}

Deletes the numeric data file.

5-26

:FILE:DELete:SETup

Deletes the setup parameter file.

5-29

:FILE:DELete:WAVE:{BINary|ASCii|FLOat}

Deletes the waveform display data file.

5-29

:FILE:DRIVe

Sets the target drive.

5-29

5.1 Command List

Summary of Contents for WT1600FC




































































































































































Search results

Summary of Contents for WT1600FC

Reviews:

YOKOGAWA WT1600FC, User Manual, Page: 38 / 163

Search results

Summary of Contents for WT1600FC

Reviews: