Standard Specifications
IM 01G05B03-01E 1st Edition
5
*7: The couplant weatherproof type is recommended for
permanent installation in the outdoor, etc. It is adhesive
liquefied rubber and tight contacts between transducers
and pipe surface can be obtained by curing it. It usually
takes one to three days for complete curing depending on
the conditions. The operating condition of ambient
temperature is as below.
Before and during curing : 0 to +50°C / 32 to 122°F
After curing : –40 to +180°C / –40 to 356°F
Accessories (for ultrasonic flowmeter US300FM)
Model Description
USPA201
Pipe mounting fixture(to add the option
/PMT)
USPA221
Blind plug for cable gland port
USPA231
Cable gland
Accessories (others)
Model Description
USPA401
RS232 cable (*9)
USPA402
RS232 adapter 9/25 (*9)
USPA411
Measuring tape
*9: Included in data transfer software US300SA as standard.
Accessories (for transducers US300FT)
Model Description
USPA001
Fixing strap (10 m / 32 ft length)
USPA002
Fixing strap (20 m / 65 ft length)
USPA011
Fixing clips
(medium type, for pipe size 40 to 100 mm / 1.5
to 4 in., set of two clips)
USPA012
Fixing clips
(large type, for pipe size 100 to 6500 mm / 4 to
255 in., set of two clips)
USPA021
Fixing bands
(only for pipe size 25 to 50 mm / 1 to 2 in.)
USPA032
Fixing chains (set of two extensible chains)
(2 m / 6.5 ft length, equal to 600 mm / 23 in.
diameter)
USPA033
Repair set for fixing chains
USPA034
Retaining clips
(set of two clips, used with fixing chains)
USPA036
Fixing chains (set of two extensible chains)
(0.5 m / 1.6 ft length, equal to 150 mm / 5.9 in.
diameter)
USPA037
Fixing chains (set of two extensible chains)
(1 m / 3.2 ft length, equal to 300 mm / 11.8 in.
diameter)
USPA053
Mounting fixture short ruler type (for
transducers medium pipe size type,
temperature range –30 to +200°C / –22 to
+392°F, set of two blocks with 120 mm / 4.7 in.
ruler)
USPA054
Mounting fixture standard type (for transducers
medium pipe size type, temperature range –30
to +200°C / -22 to +392°F, set of two blocks
with 330 mm / 13 in. ruler)
USPA055
Mounting fixture magnetic general temperature
type (for transducers medium pipe size type,
temperature range –30 to +100°C / –22 to
+212°F, set of two blocks with 330 mm / 13 in.
ruler)
USPA057
Mounting fixture standard type (for transducers
large or very large pipe size type, temperature
range –30 to +200°C / –22 to +392°F, set of
two blocks with 330 mm / 13 in. ruler)
USPA058
Mounting fixture magnetic general temperature
type (for transducers large or very large pipe
size type, temperature range –30 to +100°C /
–22 to +212°F, set of two blocks with 330 mm /
13 in. ruler)
USPA073
Additional magnets for mounting fixture
magnetic general temperature type
(for transducers medium pipe size type,
temperature range –30 to +100°C / –22 to
+212°F, set of two magnets)
USPA075
Additional magnets for mounting fixture
magnetic general temperature type
(for transducers large or very large pipe size
type, temperature range –30 to +100°C / –22 to
+212°F, set of two magnets)
USPA081
Ruler for mounting fixture
(marked length 120 mm, equivalent to 4.7 in.)
USPA082
Ruler for mounting fixture
(marked length 330 mm, equivalent to 13 in.)
USPA091
Acoustic couplant general temperature type
(non-adhesive)
(100 g, –30 to +130°C) (0.22 lb, –22 to +266°F)
USPA092
Acoustic couplant high temperature type (non-
adhesive)
(100 g, –30 to +200°C) (0.22 lb, –22 to +392°F)
USPA097
Acoustic couplant weatherproof type (adhesive)
(*10)
(100 g, –40 to +180°C) (0.22 lb, –40 to +356°F)
*10: The operating condition of ambient temperature is as
below.
Before and during curing : 0 to +50°C / 32 to 122°F
After curing : –40 to +180°C / –40 to 356°F
