2-3
TI04L55B01-01EN
Max. 420 Channel Measurement through Expansion (Multi unit)
This system consists of sub units connected to a main unit for data acquisition.
Up to six sub units can be connected.
The GM10-2 can be used to configure a 420-channel (input channel) system. Expansion
modules are used to connect between the main unit and sub units and between sub units. Units
are connected using Ethernet cables. The connections can extend up to 100 m total. Less wiring
is possible by distribution such as when measurement locations are separated far apart.
Main unit
LAN cable
Sub unit
* The main unit and sub units are connected directly using LAN cables. Hubs and
repeaters cannot be used.
Less Wiring by Distribution
If the measuring site and the data logger installation location are far apart, a sub unit can be
installed at the site to monitor the data without having to extend thermocouple and other signal
wires over long distances.
LAN cabel
Sub unit
Thermocouples
Main unit
Up to 100 m
2
Scalable Data
Acquisition System
Summary of Contents for SMARTDAC+ GM
Page 2: ...Blank Page...
