YOKOGAWA SMARTDAC+ GM Technical Information Download

Page: 11 / 74

1-6

TI 04L55B01-01EN

1.1.5

Offline Configuration and Monitoring

Hardware Configurator

This software is used to transfer setup data to the GM and also save setup data.

USB and Bluetooth connection is possible in addition to Ethernet connection.

Ethernet

Load settings

Hardware Configurator

SD card

Setup data

Universal Viewer

This software is used to display measurement data files on a PC and print them.

You can also calculate statistics on a specified set of data and convert data to ASCII and Excel

formats.

IP Address Configurator

This software is used to set the GM10’s IP address, subnet mask, default gateway, and the like.

1.1.6

System Configuration Using Data Logging Software

GA10 (Sold separately)

A dedicated software application for configuring a full-fledged system is available.

This application is capable of acquiring data from multiple devices including S GM.

•  Max. 100 devices
•  100 ms high-speed acquisition
•  Max. 2000 channels (tags)

Ethernet

Data Logging Software GA10

Summary of Contents for SMARTDAC+ GM











































































Search results

Summary of Contents for SMARTDAC+ GM

Reviews:

Related manuals for SMARTDAC+ GM

Brands by name

Popular brands

YOKOGAWA SMARTDAC+ GM, Technical Information

Search results

Summary of Contents for SMARTDAC+ GM

Reviews:

Related manuals for SMARTDAC+ GM

Brands by name

Popular brands