YOKOGAWA PR300 User Manual Download Page 134

Page: 134 / 141

<Toc> <Ind>

<8. PR201 Original Communication Protocol>

8-19

IM 77C01E01-10E

Note 1: Information on model and suffix codes

PR201-

夽夹

011-20

夽

: Returns the current phase and wire system:

1: Single-phase two-wire

2: Single-phase three-wire

3. Three-phase three-wire

4. Three-phase four-wire

5. Three-phase four-wire (2.5e)

夹

: Returns the current rated input:

1: 150V/1A

2: 150V/5A

3: 300V/1A

4: 300V/5A

5: 600V/1A

6: 600V/5A

011: Returns a suffix code.

0: Produces neither analog output nor pulse output.

1: RS-485 communication

1: Power factor measuring function

20: Returns a suffix code.

2: 85 to 264 VAC

0: Always 0

• Example

Reads the format of PR300 with station number 01.

䊐䊐

indicates the checksum value.

[Command]

[STX]DGX01

䊐䊐

[ETX][CR]

Returns the following response for the above command.
Wire system: Single-phase three-wire, Rated input: 300V/5A, I/O: Without analog
output, without pulse output, Communication: RS-485 communication, Measurement:
Power factor measurement

[Response]

[STX]DGX01PR201-24011-20

䊐䊐

[ETX][CR]

NOTE

When reading the model and suffix codes of PR300, “PR201” is returned as model name
because of the compatibility with existing application for PR201.

Summary of Contents for PR300














































































































































Search results

Summary of Contents for PR300

Reviews:

Related manuals for PR300

Brands by name

Popular brands

YOKOGAWA PR300, User Manual

Search results

Summary of Contents for PR300

Reviews:

Related manuals for PR300

Brands by name

Popular brands