YOKOGAWA MVAdvanced MV1000 User Manual Download Page 85

Page: 85 / 310

3-5

IM MV1000-01E

Measurement Channels and

Alarms

App

Index

3.3 Settng the Input Range

• Range > Unt

Set the unit (up to six characters,

A a # 1

)

• Range > Ref. CH

The reference channel for difference computation.

• Range > Low-cut

Select On to use the low-cut function.

* The low-cut value for 1-5 V input is fixed at 0% of the input span.

• Range > Low-cut value

With square root computation, set the low-cut value in the range of 0.0% to 5.0% of

the input span.

Input value

Low-cut value

Result of square root computation

Measured value

Summary of Contents for MVAdvanced MV1000























































































































































































































































































































Search results

Summary of Contents for MVAdvanced MV1000

Reviews:

Brands by name

Popular brands

YOKOGAWA MVAdvanced MV1000, User Manual

Search results

Summary of Contents for MVAdvanced MV1000

Reviews:

Brands by name

Popular brands