manualshive.com logo in svg

YOKOGAWA MVAdvanced MV1000, User Manual

Share
Download
YOKOGAWA MVAdvanced MV1000 User Manual Download Page 162

6-8

IM MV1000-01E

Settngs

•  Message

  •  Wrte group

  This setting applies only to messages that are written using keys.

Settng

Descrpton

Common

Writes messages to all groups.

Separate

Writes messages to the displayed group.

  •  Power-fal message

 

 See section 6.16 for details.

  •  Change message

 

 See section 6.3 for details.

•  Message No.

  Select a message number (1 to 100). Message numbers 1 to 10 are used for free 

messages.

*

If you set a free message, the corresponding message number will be 

overwritten.

*  Messages that are created and written on the spot.

•  Message > Characters

  Set the message (up to 32 characters, 

A a # 1

).

Procedure

•  Wrtng a Message

  You cannot write a message when memory sampling has stopped.

1.

  Display the group that you want to write a message to.

•  Even when Write group is set to Separate, a message is written to all groups if the MV is 

showing a display unrelated to a group (such as the overview display). When the MV is 
showing a 4-panel display, a message is written to the displayed group.

•  When Write group is set to Common, a message is written to all groups.

2.

  Press 

FUNC

.

 The function menu appears.

3.

  Press the 

Message

 soft key.

4.

  Press the soft key corresponding to the desired message number range (example: 

[1-10]).

 A list of messages appears.

 

 

       

6.4  Wrtng a Message

Summary of Contents for MVAdvanced MV1000























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands