11/12
IM MT300-71EN
:CALibrate:DMM:DATE?
Function
Queries the date when the adjustment value of
voltage/current measurement was written.
Syntax
:CALibrate:DMM:DATE?
Example
:CALIBRATE:DMM:DATE?
-> :CALIBRATE:DMM:DATE "2019/09/12"
Description On models without the /DM option, a “241:
Hardware missing” error will occur.
:CALibrate:DMM:INITialize
Function
Initializes the adjustment value of voltage/current
measurement.
Syntax
:CALibrate:DMM:INITialize
Example
:CALIBRATE:DMM:INITIALIZE
Description • Initializes the adjustment value of voltage/
current measurement. On models without the /
DM option, a “241: Hardware missing” error will
occur.
• Use the
:CALibrate:FUNCtion
command in
advance to set the adjustment target to DMM.
If the adjustment target is not DMM, a “221:
Setting conflict” error will occur.
:CALibrate:DMM:MEASure?
Function
Queries the measured voltage/current.
Syntax
:CALibrate:DMM:MEASure?
Example
:CALIBRATE:DMM:MEASURE?
-> :CALIBRATE:DMM:MEASURE 5.0000E+00
Description • On models without the /DM option, a “241:
Hardware missing” error will occur.
• If the value is +OverRange or +OverFlow,
9.90E+37 is returned.
If the value is −OverRange or −OverFlow,
−9.90E+37 is returned.
If DMM is not selected with the
:CALibrate:FUNCtion
command, 9.91E+37
is returned.
:CALibrate:DMM:POINt
Function
Sets or queries the adjustment point of the
measurement range of the voltage/current
measurement to be adjusted.
Syntax
:CALibrate:DMM:POINt {PFULL|MFULL}
:CALibrate:DMM:POINt?
PFULL: Full-scale positive value
MFULL: Full-scale negative value
Example
:CALIBRATE:DMM:POINT PFULL
:CALIBRATE:DMM:POINT?
-> :CALIBRATE:DMM:POINT PFULL
Description • On models without the /DM option, a “241:
Hardware missing” error will occur.
• Use the
:CALibrate:FUNCtion
command in
advance to set the adjustment target to DMM.
If the adjustment target is not DMM, a “221:
Setting conflict” error will occur. A query returns
the current value.
:CALibrate:DMM:RANGe
Function
Sets or queries the measurement range of the
voltage/current measurement to be adjusted.
Syntax
:CALibrate:DMM:RANGe {VOLTage,
<
Voltage
>|CURRent,<
Current
>}
:CALibrate:DMM:RANGe?
<Voltage> = 5 (V)
<Current> = 20 (mA)
Example
:CALIBRATE:DMM:RANGE VOLTAGE,5V
:CALIBRATE:DMM:RANGE?
• 5 V range
-> :CALIBRATE:DMM:RANGE VOLTAGE,
5.000E+00
• 20 mA range
-> :CALIBRATE:DMM:RANGE CURRENT,
20.0E−03
Description • On models without the /DM option, a “241:
Hardware missing” error will occur.
• Use the
:CALibrate:FUNCtion
command in
advance to set the adjustment target to DMM.
If the adjustment target is not DMM, a “221:
Setting conflict” error will occur. A query returns
the current value.
:CALibrate:DMM:WRITe
Function
Writes the adjustment value of voltage/current
measurement.
Syntax
:CALibrate:DMM:WRITe
Example
:CALIBRATE:DMM:WRITE
Description • On models without the /DM option, a “241:
Hardware missing” error will occur.
• Use the
:CALibrate:FUNCtion
command in
advance to set the adjustment target to DMM.
If the adjustment target is not DMM, a “221:
Setting conflict” error will occur.
• When executed, the adjustment target is set to
NONE.
