YOKOGAWA FG420, User Manual

Page: 58 / 180

44 IM FG410-01EN
4. BASIC OPERATION
Remote setting [Remote]
Selects GPIB/USB and sets the GPIB address. The USB ID is also displayed.

“8.1 Selecting
Remote Interface [Remote]” in the Application Instruction Manual.
Display setting [Display]
Sets the backlight of the display.

“8.2 Display Settings [Display]” in the Application Instruction
Manual.
If the display contents are invisible for the backlight out, press on the
MENU
MENU key for a while
to light up the backlight forcibly.
Modify direction setting [Modify Direction]
Sets the movement direction when the modify knob is turned.

“8.3 Modify Knob and Modify
Direction Setting [Modify Direction]” in the Application Instruction Manual.
Operation sound setting [Sound]
Sets the operation sound.

“8.4 Operation Sound Setting [Sound]” in the Application Instruction
Manual.
Self-check [Self Check]
Performs internal status check.

“8.5 Self Check [Self Check]” in the Application Instruction
Manual.
Internal information display [Information]
Displays the firmware version and latest calibration date.

“8.6 Product Information Display
[Information]” in the Application Instruction Manual.
Channel mode setting [Channel Mode] (FG420 only)
Sets the type of 2-channel ganged operation. Independent, 2-phase, constant frequency difference,
constant frequency ratio, and differential output can be selected from.

“3.4 Maintaining Both
Channels to Same Frequency (2-Channel Ganged Operation, 2-Phase)”, “3.5 Keeping Frequency
Difference Constant (2-Channel Ganged Operation, 2-Tone)”, “3.6 Keeping Frequency Ratio
Constant (2-Channel Ganged Operation, Ratio)”, and “3.7 Obtaining Differential Output (2-Channel
Ganged Operation, Differential)” in the Application Instruction Manual.
Inter-channel parameter copy [Parameter Copy] (FG420 only)
Copies the settings between channels.

“3.1 Copying Settings Between Channels” in the
Application Instruction Manual.
2-channel same value setting On/Off [Both] (FG420 only)
Switches on/off setting of the same value for both channels.

“3.2 Unifying Settings of 2
Channels” in the Application Instruction Manual.