manualshive.com logo in svg

YOKOGAWA FC400G, User Manual, Page: 90 / 91

Share
Download
YOKOGAWA FC400G User Manual Download Page 90

i

IM 12F5A1-01E

REVISION INFORMATION

l

 Title 

:  Model FC400G Free Available Chlorine Analyzer (Non-Reagent Type)

l

 Manual No.  :  IM 12F5A1-01E

Apr. 2019/5th Edition

 

Style change to S2 (2-4, 2-5, 2-6, 4-1, 8-5, 8-6, 8-7,  8-8, 8-9,  9-4, 10-1, 10-3

 

Corrections (2-3, 3-4, 6-3, 8-2, 8-3)

 

CMPL 12F05A01-03EN newly released

Apr. 2012/4th Edition

 

P. 1-3, Some revision of Figure 1.2. 

  

P. 2-2, Some revision of service level code function. (*)

  

P. 2-5, Some revision of Note 2 for PH8HF MS-code and “2.3.3 Spare Parts”.

  

P. 3-3, Some revision of Figure 3.3.

  

P. 4-4, Some revision of “4.2.3 Modes in Service level”. (*)

  

P. 5-11, Some revision of “5.4.2 Modes in Service level and Selection of Their Setting Items”. (*)

  

P. 5-15 to 5-17, Some revision of (f) <*SERVC> Service level. (*)

  

P. 6-1, Some revision of “6.1.2 Filling with Ceramic Beads for Electrode Polishing”.

  

P. 6-3, Some revision of “6.1.4 Polishing the Indicator Electrode”.

  

P. 6-7, Some revision of Table 6.2 Setting Item List. (*)

 

P. 6-10, Some revision of Figure 6.5.

  

P. 6-11 to 6-12, Some revision of “6.3.3 Setting in the Service level”. (*)

 

P. 8-1 to 8-2, Some revision of “8.1.1 Polishing the Indicator Electrode”. 

 

P. 8-4, Some revision of Figure 8.4. 

 

P. 8-5, Some revision of Figure 8.5. 

 

P. 8-6, Some revision of “8.2.2 Check / Maintenance / Replacement of Drive Belt”.  

 

P. 8-7 to 8-8, Some revision of “8.2.3 Check/ Maintenance/ Replacement of Driven Shaft Assembly”. 

 

P. 9-1, Some revision of “9.1.1 Indication of Error Message or Error Code”. (*)

 

P. 10-1, Some revision of “10.1 Spare Parts and Consumables List”.

 

P. 10-3, Some revision of “10.2.9  Motor assembly (See CMPL)”, “10.2.10 Gear head (See CMPL)”.

 

CMPL 12F05A01-01E revised to 7th edition (item 3 P/N of page 3 changed).

 

(*) Service code 03 description corrected.

Mar. 2011/3rd Edition

 

Remake and all pages changed.

Feb. 2003/2nd Edition

 

Stanchion model changed. Combined chlorine insensitive version option /CC, operation for auto-zero 

calibration, etc added. All pages changed.

Jan. 1993/1st Edition

 

Newly published.

Summary of Contents for FC400G




























































































Reviews:

No comments