YOKOGAWA FA Link H2, User Manual

Page: 9 / 104

vii
IM 34M06H43-02E 2nd Edition : Sep.30, 2019-00
 Do not use unused terminals:
-
Do not connect wires to unused terminals on a terminal block or in a connector.
Doing so may adversely affect the functions of the module.
 Use the following power source:
-
Use only F3PU 
-
 as the power supply module.
-
If using this product as a UL-approved product, for the external power supply, use a
limited voltage / current circuit power source or a Class 2 power source.
-
If using this product as a CE-complied product, for the external power supply, use a
SELV and limited-energy circuit separated by reinforced insulation or double
insulation from hazardous voltage.

Refer to the user's manual before connecting wires:
-
Refer to the “Hardware Manual” (IM 34M06C11-01E) or the applicable user’s
manual for the external wiring drawing.
-
Refer to “A3.6.5 Connecting Output Devices” in the “Hardware Manual” before
connecting the wiring for the output signal.
-
Refer to “A3.5.4 Grounding Procedure” in the “Hardware Manual” for attaching the
grounding wiring.
 Authorized Representative:
-
The Authorized Representative for this product in the EEA is:
Yokogawa Europe B. V.
Euroweg 2, 3825 HD Amersfoort, The Netherlands
