YOKOGAWA F3LA01-0N, User Manual

Page: 19 / 76

2-5
IM 34M6H33-01E 1st Edition : July 1.2004-00
2.8 Attaching/Detaching the Module
Attaching a Module
Figure 2.6 shows how to attach this module to the base module. First hook the anchor
slot at the bottom of the module to be attached onto the anchor pin on the bottom of the
base module. Push the top of the module toward the base module until the
anchor/release button clicks into place.
CAUTION
Always switch off the power before attaching or detaching a module.
Base module
Asi Master module
Anchor point
F01.VSD
Figure 2.6 Attaching/Detaching a Module
CAUTION
DO NOT bend the connector on the rear of the module by force during the above
operation. If the module is pushed with excessive force, the connector pins may bend,
causing in an error.
Detaching a Module
To remove the module from the base module, reverse the above operation.
Press the anchor/release button on the top of the module to unlock it, and tilt the module
away from the base module.