YOKOGAWA F3LA01-0N, User Manual

Page: 40 / 76

7-2
IM 34M6H33-01E 1st Edition : July 1.2004-00
Command Execution Sequence
Set the Command Setting and Data Settings 1-10 in the Command Setup Area
appropriately by referring to Section 7.2, "Command Setup". Turn on the Start Command
output relay. The Executing Command input relay turns on. While the input relay is on,
no new command will be accepted. Wait for the Executing Command input relay to turn
off, and the Command Completed input relay to turn on, and then check that the
Command Error input relay is not on.
Turning off the Start Command output relay also turns off the Command Completed
input relay and Command Error input relay.
Start Command
output relay
Y 33
Executing Command
input relay
X 01
Command Completed
input relay
X 08
Command Error
input relay
X 04
Table 7.1 Command Execution Sequence