![background image](http://html1.mh-extra.com/html/yokogawa/exa-do402g/exa-do402g_instruction-manual_3467515046.webp)
5-18 Parameter setting
IM 12J6B3-E-H
5-3-3. Calibration functions
Code 20
*
∆
T.SEC
Set stability parameters for calibration. A greater time, and/or a smaller step gives
*
∆
mg/l
greater stability before a calibration can be accepted. Use caution, however, to
avoid very long calibration times.
Code 21
*0.CAL
Not normally necessary, zero calibration can be enabled when required.
Code 22
*ZERO
Calibration values can be entered from independent (laboratory) data.
*SLOPE
Summary of Contents for EXA DO402G
