![background image](http://html1.mh-extra.com/html/yokogawa/exa-do402g/exa-do402g_instruction-manual_3467515029.webp)
IM 12J6B3-E-H
Parameter setting 5-1
5. PARAMETER SETTING
5-1. Maintenance mode
Standard operation of the EXA instrument involves use of the maintenance (or operating) mode to set up
some of the parameters.
Access to the maintenance mode is available via the six keys that can be pressed through the flexible
window in the instrument cover. Press the MODE-key once to enter this dialog mode.
NOTE:
At this stage the user will be prompted for pass code where this has been previously set up in service code
52 in chapter 5.
Air calibration
See “calibration” section 6.
H
2
0 calibration
See “calibration” section 6.
Display
See “operation” section 4.
Setpoint
Select and adjust setpoint (when enabled in service menu section 5, service code
51). See adjustment procedure 5-4.
Wash
Manually start/stop wash cleaning (when enabled in service menu section 5,
service code 51). See adjustment procedure 5-3.
Hold
Manually switch on/off HOLD (when enabled in commissioning menu section). See
adjustment procedure 5-2.
Summary of Contents for EXA DO402G
