YOKOGAWA EML500 Series, User Manual, Page: 55 / 85

6-12
IM80B80T10E 21th Edition : Jul.1,2007-00
< 6.INSTALLATION >
The screen advances to Step n . Here, whether a
third trip out (3RD) is to be made (GO) or not (NO)
is selected. If the
F 1
key is pressed to select
GO, the screen advances to Step o . (operations
for the third trip out are activated from here ). The
operations and screens in Steps o . to r . are the
same as those in Steps f . to i . (the first trip out).
If the
F 2
key is pressed to select NO in Step
n . or the same key is pressed in Step r ., the screen
advances to Step s . Here, whether the set of data
that has been saved up to the second or third trip
out is deleted (YES) or not (NO) is selected.
Press the
F 1
key to delete the existing data
and acquire new data. The Screen reverts to Step
f . to acquire new set of data . If the
F 2
key is
pressed, the new set of data is saved, and the
screen advances to Step t .
To acquire another set of data, press the
F 1
key (CONT). To finish the milepost measurement,
press the
F 2
key (END). The screen then
returns to Step a .
NOTE
If the
DISPL
or
PREV
key is pressed to go back to a previous step rather than selecting END
in Step t ., all the milepost data that has been saved will be lost.
F 1 F 2 DISPL PREV MODE
F 1 F 2 DISPL PREV MODE
MAINT
MAINT
F 1 F 2 DISPL PREV MODE
MAINT
p.
o.
q.
r.
F 1 F 2 DISPL PREV MODE
MAINT
ENT
F 1 F 2 DISPL PREV MODE
F 1 F 2 DISPL PREV MODE
MAINT
MAINT
F 1 F 2 DISPL PREV MODE
MAINT
t.
s.
n.
F 1 F 2 DISPL PREV MODE
MAINT
To a.
From m.
To f.
To f.
(to the following screen if ten sets of data have been acquired)
F 1 F 2 DISPL PREV MODE
F 1 F 2 DISPL PREV MODE
MAINT
MAINT
F 1 F 2 DISPL PREV MODE
MAINT
p.
o.
q.
r.
F 1 F 2 DISPL PREV MODE
MAINT
ENT
F 1 F 2 DISPL PREV MODE
F 1 F 2 DISPL PREV MODE
MAINT
MAINT
F 1 F 2 DISPL PREV MODE
MAINT
t.
s.
n.
F 1 F 2 DISPL PREV MODE
MAINT
To a.
From m.
To f.
To f.
(to the following screen if ten sets of data have been acquired)