YOKOGAWA EML500 Series, User Manual, Page: 54 / 85

6-11
IM80B80T10E 21th Edition : Jul.1,2007-00
< 6.INSTALLATION >
Note that the operations at a to i are for obtaining data on the first trip out (1ST).
At f , press the
F 1
key (START) when the first
trip out starts. The display then changes to that
marked g . Next, press the
F 1
key (STOP)
when the trip out is finished. This allows the display
to change to that marked h . Here, the log speed (L)
and real speed (R) that have just been obtained
are displayed.
If the
ENT
key is pressed at h , the display marked
i appears. This display asks whether the obtained
data on the trip out are to be cancelled or not. To
cancel them and restart the trip out, press the
F 1
key (YES) . The display then returns to f .
To validate the obtained data and proceed to the
trip back (2ND), press the
F 2
key (NO) while
the display is at i . This allows the display to ad-
vance to j (the operations for the trip back start from
here).
The operations and display at
j to m are the same
as those for the trip out ( f to i ).
If the
F 2
key is pressed while the display is at
m (after the completion of the trip back), the display
changes to that marked n as shown on the follow-
ing page.
F 1 F 2 DISPL PREV MODE
F 1 F 2 DISPL PREV MODE
MAINT
MAINT
F 1 F 2 DISPL PREV MODE
MAINT
g.
f.
h.
i.
F 1 F 2
DISPL
PREV MODE
MAINT
ENT
F 1 F 2 DISPL PREV MODE
F 1 F 2 DISPL PREV MODE
MAINT
MAINT
F 1 F 2 DISPL PREV MODE
MAINT
k.
j.
l.
m.
F 1 F 2 DISPL PREV MODE
MAINT
ENT
To a From e,s,or t
To n.
F 1 F 2 DISPL PREV MODE
F 1 F 2 DISPL PREV MODE
MAINT
MAINT
F 1 F 2 DISPL PREV MODE
MAINT
g.
f.
h.
i.
F 1 F 2
DISPL
PREV MODE
MAINT
ENT
F 1 F 2 DISPL PREV MODE
F 1 F 2 DISPL PREV MODE
MAINT
MAINT
F 1 F 2 DISPL PREV MODE
MAINT
k.
j.
l.
m.
F 1 F 2 DISPL PREV MODE
MAINT
ENT
To a From e,s,or t
To n.