16
IM-P-20200627-01
go back and leave this menu.
4.
With the option
Free
, a current between 4 and
20 mA can be configured.
•
By default the current simulation is
Not
active
, as shown in the display.
•
Enter the desired value, and push to
confirm.
•
The status on the display will change
to
Active
and the current simulation is
started for the selected value.
•
Push the navigation button to de-
activate the current simulation.
•
Move the navigation button to the left to
go back and leave this menu.
6.11 Tank
Linearization
In this menu, various tank linearizations can be
selected.
Factory setting = No linearization
For a horizontal tank or a tank with a cone,
linearization can be configured. The volume as
a measured value will be displayed on the home
screen. (Must be set in P104)
The values (configured in the following settings)
must be in meters.
1.
Navigate to program point P111 – TANK LIN,
and push the navigation button to enter the
menu. Six choices appear on the screen:
No Lin:
No linearization
Hor. Tank:
Linearization setting for a
horizontal tank: cylindrical and elliptic
Vert. Cone:
Linearization setting for a vertical
tank with a conical bottom.
Vert. Sphere:
Linearization setting for a
vertical tank with a spherical bottom.
Vert. Trunc:
Linearization setting for a vertical
tank with a truncated bottom.
Free lin:
Free linearization setting, adjustable
in 70 free programmable points.
The following describes the setting for each
linearization configuration.
Tank lin.
P111
6.11.1 Linearization Disable
With the choice No. Lin. an existing linearization can
be turned off and can be identified by the symbol on
the home screen:
Linearization can be recognized by the following
symbol on the home screen:
2.
Select No Lin. and confirm this with the button.
3.
The Save
icon will be displayed to indicate
that the setting is saved.
The following pages describe the setting for
each type of linearization.
