<11. General Specifications>
11-3
IM 01C27C01-01EN
Wetted Parts Materials:
High pressure side:
Refer to “Model and Suffix Codes.”
Flushing connection ring (optional)
Ring and Vent/Drain plugs
Refer to “Model and Suffix Codes”
(Spiral) gasket for transmitter side
316 SST (Hoop), PTFE Teflon (Filler)
Low pressure side:
Diaphragm, Cover Flange, Process
Connector, Capsule Gasket, and Vent/Drain
plug
Refer to “Model and Suffix Codes”
Process connector gasket
PTFE Teflon
Non-wetted Parts Materials:
Process Flange
Refer to “Model and Suffix Codes”
Bolting
ASTM-B7 carbon steel, 316L SST stainless
steel, or ASTM grade 660 stainless steel
Housing
Low copper cast aluminum alloy with
polyurethane,mint-green paint (Munsell
5.6BG 3.3/2.9 or its equivalent)
Degrees of Protection
IP66/IP67, NEMA4X
Cover O-rings
Buna-N
Name plate and tag
316 SST tag plate wired onto transmitter.
Fill Fluid
Silicone oil, Fluorinated oil (optional)
Weight:
Flush type
3-inch ANSI Class150 flange: 11.1 kg (24.2
lbs)
Without battery pack and process connector.
Extended type
4-inch ANSI Class150 flange, extension
length (X
2
)= 100 mm: 15.6 kg (34.4 lbs)
Without battery pack and process connector.
