<10. Parameter Summary>
10-3
IM 01C27C01-01EN
Object
ID
Attribute
ID
Label
Description
Default
value
Handling
1.
UAPMO
block
(continued)
121
Faults Sensor or
actuator Alert
The On/Off or priority for Faults Sensor or actuator
Alert can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
1. TRUE
2. 15
W
122
Faults Electronics
Alert
The On/Off or priority for Faults Electronics Alert can
be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 1
1. TRUE
2. 15
W
123
Faults process
influence Alert
The On/Off or priority for Faults process influence Alert
can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for EJX.
1. TRUE
2. 15
W
124
Faults non-
compliance Alert
The On/Off or priority for Faults non-compliance Alert
can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for EJX.
1. TRUE
2. 15
W
125
Other faults Alert
The On/Off or priority for Other faults Alert can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for EJX.
1. TRUE
2. 15
W
2.
UDO
block
2
DESCRIPTION
Indicates the version and model information of the
downloaded data.
---
R
3
STATE
Indicates the status of UAP block.
0 Idle
1 Downloading
3 Applying
4 DLComplete
6 DLError
---
R
5
MAX_BLOCK_
SIZE
Maximum block size. This value is smaller than the
maximum data size of APDU.
---
R
14
LAST_BLOCK_
DOWNLOADED
Indicates the last downloaded block number.
0 means that no block has been downloaded.
---
R
16
ERROR_CODE
Indicates the error codes for DLError.
0 = noError
1 = Timeout
2 = ClientAbort
64 = Apply failure
---
R
3.
CO
block
1
REVISION
Indicates the revision number such as COMM_
ENDPOINT, etc.
---
R
2
COMM_
ENDPOINT
Indicates the Endpoint information. The following
shows the components.
1. Network address of remote endpoint
2. Transport layer port at remote endpoint
3. Object ID at remote endpoint
4. Stale data limit
5. Data publication period
6. Ideal publication phase
7. PublishAutoRetransmit
8. Configuration status
---
W
3
COMM_
CONTRACT
Indicates the Contract information. The following
shows the components.
1. ContractID
2. Contract_Status
3. Actual_Phase
---
R
