5-25
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
Command
Function
Page
Queries all settings related to the 7-bit + Sub address of the I
I2CBus:ADATa:BIT7APsub:ADDRess?
Queries all settings related to the 7-bit address of the 7-bit + Sub address of
I2CBus:ADATa:BIT7APsub:ADDRess:
Sets the 7-bit address of the 7-bit + Sub address of the I
I2CBus:ADATa:BIT7APsub:ADDRess:
Sets the 7-bit address of the 7-bit + Sub address of the I2C bus trigger in
binary notation or queries the current setting.
Queries all settings related to the Sub address of the 7-bit + Sub address of
Sets the Sub address of the 7-bit + Sub address of the I
Sets the Sub address of the 7-bit + Sub address of the I
binary notation or queries the current setting.
Sets the address type of the I
C bus trigger or queries the current setting.
Queries all settings related to the clock of the I
C bus trigger or queries the current setting.
Queries all settings related to the data of the I
Sets the number of data bytes of the I
C bus trigger or queries the current
Sets the determination method (match or not match) of the data of the I
bus trigger or queries the current setting.
Sets the position for comparing the data pattern of the I
C bus trigger in hexadecimal notation.
Enables/Disables the data conditions of the I
C bus trigger in binary notation or queries the current
Sets the pattern comparison start position mode of the data of the I
trigger or queries the current setting.
C bus trigger or queries the current setting.
Queries all settings related to the general call of the I2C bus trigger.
Queries all settings related to the 7-bit master address of the general call of
I2CBus:GCALl:BIT7maddress:HEXA
Sets the 7-bit master address of the general call of the I
Sets the 7-bit master address of the general call of the I
binary notation or queries the current setting.
I2CBus:GCALl:SBYTe (Second Byte)
Sets the second byte type of the general call of the I
Sets the trigger mode of the I
C bus trigger or queries the current setting.
Queries all settings related to the NON ACK ignore mode of the I
Sets whether to ignore NON ACK in high speed mode of the I
or queries the current setting.
Sets whether to ignore NON ACK in read access mode of the I
or queries the current setting.
Sets whether to ignore NON ACK in the start byte of the I
5.1 List of Commands