18
IM 701430-51E
Executing the Analysis
14.
Press the “Test Exec” soft key executes the analysis. The analysis result is
listed at the bottom of the screen.
Analysis result list
15.
If the jog shuttle control is not set to “List,” press the “List” soft key.
16.
Turn the jog shuttle to select an arbitrary frame from the list of analysis results.
The selected frame appears highlighted. The waveform in the selected frame is
displayed in the Zoom Box
Note
When the memory length is 16 Mwords on a 16M DL7200 model, normal operation may not
be possible for frames near the ends of the main screen due to the limitation on the Zoom
Position. The Zoom Position may stick to the selectable boundary value when search or Field
Jump is executed.
Setting the Zoom Ratio
17.
Press the “Z1 Mag/Z1 Position” soft key to set the jog shuttle control to “Z1
Mag.”
Turn the jog shuttle to set the zoom ratio of the Z1 zoom box.
Setting the Zoom Position
18.
Press the “Z1 Mag/Z1 Position” soft key to set the jog shuttle control to
“Z1Position.”
Turn the jog shuttle to set the zoom position of the Z1 zoom box. The highlighted
display of the list at the bottom of the screen moves to the zoom position frame.
Displaying the Detailed Analysis List
19.
Press the “Detail” soft key to display the analysis result dialog box.
At this point, the highlighted display is located at the same position as the
highlighted frame of the list of analysis results in step 14.
4. Analyzing and Searching
