17
IM 701430-51E
Performing the Analysis
5.
Press the “Analyze Setup” soft key to display a dialog box for setting the
analysis conditions. Turn the jog shuttle to select the item. Press the “SELECT”
key to display a menu used to set the item or change the selected item.
Setting the Bit Rate
6.
Turn the jog shuttle to move the cursor to “Bit Rate” and press the “SELECT” key.
7.
Turn the jog shuttle to select “1M,” “500k,” “250k,” “125k,” “100k,” “83.3k,” “50k,”
or “33.3k” and press the “SELECT” key. Pressing the “RESET” key will reset
the value to 500k.
Setting the Sample Point
8.
Turn the jog shuttle to move the cursor to “Sample Point” and press the
“SELECT” key.
9.
Turn the jog shuttle to select which point within 1 bit to be sampled and press the
“SELECT” key. Pressing the “RESET” key will reset the value to 62.5.
Setting Vdiff
10.
Turn the jog shuttle to move the cursor to “Vdiff” and press the “SELECT” key.
11.
Turn the jog shuttle to select “CAN_H - CAN_L” or “CAN_L - CAN_H” and press
the “SELECT” key.
Setting Thr Upper
12.
Turn the jog shuttle to set the level used to judge High and press the “SELECT”
key. You can move between the digits using the arrow keys.
Pressing the “RESET” key resets the level to 0 V.
Setting Thr Lower
13.
Turn the jog shuttle to set the level used to judge Low and press the “SELECT”
key. You can move between the digits using the arrow keys.
Pressing the “RESET” key resets the level to 0 V.
Setting the Stuff Bit
See section 5, “Performing Stuff Bit Computation.”
4. Analyzing and Searching
