background image

IM CA500-02EN

13

Regulations and Sales in Each Country or Region

Waste Electrical and Electronic Equipment

 

Waste Electrical and Electronic Equipment (WEEE), Directive

 

(This directive is valid only in the EU.)

 

This product complies with the WEEE directive marking 

requirement. This marking indicates that you must not discard this 

electrical/electronic product in domestic household waste.

 

Product Category

 

With reference to the equipment types in the WEEE directive, this 
product is classified as a “Monitoring and control instruments” 

product.

 

When disposing products in the EU, contact your local Yokogawa 

Europe B.V. office.

 

Do not dispose in domestic household waste.

EU Battery Directive

(This directive is valid only in the EU.)

 Batteries are included in this product. This marking indicates 

they shall be sorted out and collected as ordained in EU Battery 

Directive.

 

Battery type:

 

1. Lithium battery

 

You cannot replace batteries by yourself. When you need to 

replace batteries, contact your local Yokogawa Europe B.V.office.

 

2. Alkaline battery

 

When disposing of alkaline batteries, follow the domestic law 

concerning disposal. Take the proper action to dispose batteries 

in accordance with the established collection system in the 

European Economic Area. For the battery removal procedure, 

see page 31.  

Authorized Representative in the EEA

Yokogawa Europe B.V. is the authorized representative of Yokogawa Test & 

Measurement Corporation for this product in the EEA. To contact Yokogawa Europe 

B.V., see the separate list of worldwide contacts, PIM 113-01Z2.

Disposing of the Instrument

When disposing of the instrument, follow the laws and ordinances of your country or 

region.

Summary of Contents for CA550






































































Reviews: