manualshive.com logo in svg

YOKOGAWA AQ6375, Getting Started Manual, Page: 23 / 38

Share
Download
YOKOGAWA AQ6375 Getting Started Manual Download Page 23

23

IM AQ6375-02EN

20 cm or

more

AQ6375

1200 ~ 2400 nm 

20 cm or

more

20 cm or

more

20 cm or

more

OPTICAL SPECTRUM ANALYZER 

There are inlet holes on the both 

sides of the instrument.

 

Ambient Temperature and Humidity

Ambient temperature:  5–35°C
Ambient humidity:    80% RH or lower (no condensation present)

Note

Condensation may occur if the instrument is moved to another place where the ambient 
temperature is higher, or if the temperature changes rapidly. In this case, let the instrument 
adjust to the ambient temperature for at least one hour before use. 

Do Not Install the Instrument in the Following Places

•  Outdoors.
•  Dangerous locations where flammable or explosive gasses, vapors, or dust is present, 

or where the possibility of explosions or fires exists. 

•  In direct sunlight or near heat sources.
•  Where an excessive amount of soot, steam, dust, or corrosive gas is present.
•   Location where mechanical vibration is high.
•  In an unstable place.
•  Where the instrument is exposed to water or other liquids.

General Handling Precautions

•  Do Not Place Anything on Top of the Instrument 

  Never stack instruments or place any other objects on top of the instrument, 

especially those containing water. Doing so can lead to malfunction.

•  Do Not Apply Shock to the Instrument
•  Take Proper Care When Carrying the Instrument

  The instrument should always be carried by two people. Hold the instrument by the 

handles on the sides of the case. The instrument weighs approximately 27 kg. Take 
precautions against injuries when carrying it. Also, always turn the power switch 
OFF, remove the power cable, and confirm that no other cables are connected 
before carrying the instrument. 

•  Clean the Instrument Properly

  When removing dirt from the case or operation panel, disconnect the power to the 

circuits under test and the instrument, remove the instrument’s power cord from the 
power outlet, then wipe gently with a clean, dry cloth. Do not use volatile chemicals 
since this might cause discoloring and deformation. 

5  Installing the Instrument

Summary of Contents for AQ6375







































Reviews:

No comments